-40%

Battery Vent Caps Bayonet Deep Cycle Forklift Golf Cart Marine Solar Wind TROJAN

$ 0.52

Availability: 1694 in stock
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Model Year: 2019
  • Made in the USA: By Americans
  • Battery Type: Wet Lead Acid Batteries
  • Refund will be given as: Money Back
  • Compatible With: Golf Cart Batteries
  • Item must be returned within: 30 Days
  • Compatable With:: Solar Batteries
  • MPN: 1050X-T
  • Availabel Colors: White
  • Fits Car Batteries?: No
  • All returns accepted: Returns Accepted
  • Fits 12V Marine Batteries?: No
  • Voltage: 6 Volt & 8 Volt
  • Condition: New
  • Brand: Premier Safety Battery Vents
  • Compatible Equipment Type: Forklift
  • Model: 105703SINGLE
  • Forklift Part Type: Battery
  • Return shipping will be paid by: Seller
  • Rubber Washer Included: Yes
  • Compatible Equipment Make: Trojan
  • Mount to Battery Type: Bayonet Battery Vent Cap

    Description

    FREE SPARE VENT WITH EVERY ORDER!!!!
    FREE SPARE VENT WITH EVERY ORDER!!!!
    FREE SPARE VENT WITH EVERY ORDER!!!!
    WILL THESE FIT MY BATTERY?
    These battery vent caps are what are called in the industry "Bayonet Battery Vents". They typically fit all 6V and 8V batteries.
    *** See photos for dimensions ***
    These DO NOT fit:
    - 12V car batteries
    - Batteries that have a single small square plate covering three cells (usually 2 plates per battery)
    NOTE:
    If you are not sure about any information on this page, feel free to send us a note. Because we work directly with the battery manufacturers, we have dimensions on just about all batteries, domestic and foreign. We will make sure you order the correct size so you know your battery vents are leak free.
    Necessary Dimensions (
    SEE PICTURES BELOW
    )...
    The widest part of the cell opening on you battery measures approximately
    1.2" / 3.0 cm
    The narrowest part of the cell opening on you battery measures approximately
    1.0" / 2.5 cm
    If you have an existing vent caps and can measure the dimensions...
    The widest part of the bottom of the vent cap (i.e. the bayonet tabs) measures approximately
    1.15" / 2.9 cm
    The narrowest part of the bottom of the vent cap measures approximately
    0.9" / 2.3 cm
    If any of the above measurements are close or within 0.10" these vent caps will form a tight seal and will not leak.
    Do all Bayonet Vents fit all 6V & 8V Batteries?
    Not always....If the fit is not precisely right, the vents may leak. This has a lot to do with the thickness of the washer and the thickness of the bayonet tabs. Only vent caps offered by Flow Systems have been tested and confirmed leak free.
    What brand name battery will bayonet battery vent caps fit?
    Bayonet vent caps will only fit some batteries from a specific manufacturer. It varies from manufacturer to manufacturer. Contact Flow Systems with the brand name of your battery and we will help you determine the best vent for your battery that will not leak. We manufacture over 50 different sizes of vent caps for batteries all over the world. These specific caps will normally fit 6V & 8V batteries from the following manufacturers:
    - Trojan Battery
    - Rolls Surrette
    - Exide Technologies
    - Deka
    - East Penn
    - US Battery
    - Crown Battery
    - Johnson Controls
    - Hawker Battery
    - Interstate
    - Batteries sold by Costco / Walmart
    - C&D Batteries
    - Northeast Industrial Batteries
    - Storage Battery Systems
    - Enersys
    - Bulldog Battery
    - Industrial Battery Engineering
    Bayonet style battery vents are most often found on:
    - Forklift / Lift Truck Batteries
    - Solar Batteries
    - Floor Scrubber Batteries
    - RV / Motorhome / 5th Wheel / Trailer House Batteries
    - Golf Cart Batteries
    - Club Car Golf Carts
    - Yamaha Golf Carts
    - E Z Go Golf Carts
    - Polaris Golf Carts
    - Cushman Golf Carts
    What does a Bayonet Vent Cap Look Like?
    If you look at the underside of the vent cap, the part that inserts into the battery, you will see two characteristic tabs on opposing sides. These bayonet tabs correspond to two tabs on the inside of the cell opening. When you insert the bayonet vent cap into the cell opening and 1/4 turn in the clockwise direction, the tabs tighten against each other and lock it down to the battery.
    Flow Systems USA
    Flow Systems is the Global Leader in design, engineering and production of mission critical components for the battery industry. Over 3000+ custom and industry standard parts including over 50+ bayonet battery vent caps.
    Water Miser Battery Vents.....The Better Battery Vent Cap Alternative
    Looking for a way to water your batteries less often, while keeping them clean and dry at the same time? Search Ebay for listing item # 320858054353 or simply search for Water Miser Battery Vent Caps! 50% less Watering.
    © FLOW SYSTEMS, USA 2019
    COPYRIGHT NOTICE: ALL GRAPHICS, PHOTOGRAPHY AND COPY ON THIS LISTING IS PROTECTED BY THE US COPYRIGHT PROTECTION ACT. ANY COPYING, DISSEMINATING, STORAGE AND/OR DISTRIBUTION OF CONTENT ON THIS PAGE IS STRICTLY PROHIBITED. © FLOW SYSTEMS, USA 2019.